Catalogue:
ELEKTON-Smart Chemical Dosing Unit

Purpose and field of application

The smart chemical dosing unit is designed to receive, storee and to inject chemicals in controlled manner into oil wells.

TECHNICAL SPECIFICATIONS

PARAMETER	VALUE
Rated capacity, l/hr	1,5	3,8	6,0
Maximum capacity no less than, l/hr	1,65	4,2	6,6
Minimum capacity, l/hr	0,01	0,01	0,01
Pump chamber volume, cm3(±5%)	1,57	4,02	6,28
Maximum allowable pressure in the discharge line, atm	250	100	60
Dosed chemical type	Scale, corrosion, paraffin inhibitors, incl. aromatic hydrocarbons, hydrate growth inhibitors
Service tank volume, m3	0,5
Kinematic viscosity of dosed media, cSt, max	800
Maximum density of dosed media, kg/m3	2000
Maximum chemical heating temperature, °С	+80
Power of the supply tank electric heaters, kW	1,04
Power consumption of the unit, kW, max	2,0
Rated voltage in three-phase power circuit, V	380±30
Rated power frequency, Hz	50±1
Rated motor power, kW	0,25
Pressure protection of the dosing pump	Upper and lower thresholds
Overall dimensions, mm, max, height x width x depth	1800*1004*1000
Zero-reagent weight, kg, max	335
Operating mode	Continuous and cyclic, unmanned
Operating conditions:
Ambient temperature, °С	-50...+60
Relative humidity at +25°C, %, max	100
Climatic version as per IEC 60721-2-1	UXL1
Enclosure type	NEMA3, NEMA4
Explosion and fire hazard category as per NPB 105-03	DN
Housing fire resistance as per SNiP 21-01-03	IV

COMPONENTS

• ELEKTON-Smart CDU Unit;
• Element for entry through UVKB-65 wellhead side outlet;
• TGP 5/20-15-M14x1.5 heated surface pipeline;
• Back-moving springs of the electrohydraulic pusher;
• Intake screens for the pump;
• Operating manual;
• Data sheets for the unit and its components.