 |
ELEKTON-04 |  |
|
Elekton 4M.02+SoftStarter (Rus.)
[Download]
- File: 967 Kb
- Revision: 28.10.2003
Software application Elekton 4M.02+SoftStarter is intended for reading-out and processing all the data from switchboard ELEKTON-03(04/07) and Read-out Unit BSI-01.
Events report log with current state and operating characteristics is read-out via standard port RS-232. The software makes visible on the PC display current status and following parameters:
voltage, currents and currents' disbalance, insulance, power factor, loading, pressure, temperature, date, time, operating time, number of starts, rotating speed, alternation of phases, number of under- and overloading restarts, as well as restarts through other causes, switching on and off with cause been specified, number of well and well cluster.
There is capability to change controller settings (to control both switchboard's operating mode and it's reaction to nominal parameters deviations) with visual control.
For switchboards manufactured after 01.01.2003: settings changing by operator are registered in the events report log with # and title of the setting, previous and new value, date and time of changing. Power cut and power-up with date and time specified are also fixed.
Elekton 4.074 (Rus.)
[Download]
- File: 4,24 Mb
- Revision: 25.02.2003г.
Software application Elekton 4M.02+SoftStarter is intended for reading-out and processing all the data from switchboard ELEKTON-03(04/07) and Read-out Unit BSI-01 with capability to maintain data base along oil fields, well clusters and wells.
There are options for events report log listing, printing diagrams Uab, Ubc, Uca, Ia, Ib, Ic, loading, time of work and standstill, causes of stoppages), as well as for information storage and export into MS Excel format for following treatment.
Control station (switchboard) ELEKTON-04. Technical specification and manual (before 31.12.02 - Rus.)
[Download]
Control station (switchboard) ELEKTON-04. Technical specification and manual (after 1.01.03 - Rus.)
[Download]
|
ELEKTON-05 | |
|
Elekton 5.05 (Rus.)
[Download]
- File: 967 Kb
- Revision: 05.02.2004г.
Software application Elekton 5.03 has been developed for reading-out and processing data from switchboard ELEKTON-05 and Read-out Unit BSI-02.
Following information is read-out via standard port RS-232:
- events report log with voltage in DC section in accordance with date and time
- output frequency
- output current
- output voltage
- cos φ (power factor)
- output current disbalance
- load power
- insulation resistance
- power cut and power-up with cause specified
Current values of parameters listed above are displayed on the monitor.
|
ELEKTON-06 | |
|
Elekton 06.02 (Rus.)
[Download]
- File: 867 Kb
- Revision: 05.01.2003
Software application Elekton 6.02 is intended for reading-out and treatment all the data from switchboard ELEKTON-06.
|
Facilities | |
|
Control station (switchboard) ELEKTON-M.Technical specification and manual (Rus.)
[Download]
- File: 867 Kb
- Revision: 05.01.2003
Test Bench "ИС-01" technical specification and manual (Rus.)
[Download]
Test Bench "ИС-02M.03" technical specification and manual (Rus.)
[Download]
Test Bench "БСИ-01" technical specification and manual (Rus.)
[Download]
|
Partners
